Learning how to fix the Xbox 360 open tray error can prove to be a very valuable skill because it is a very common problem among Xbox owners. Since its release in 2006 the Xbox 360 has been sort of a problem magnet. When I mean by this is that there are numerous reports from disgruntled Xbox 360 owners who are dealing with one issue of another. For example the flashing red lights, or the e74 error; just to name a few.

Since it is possible for the Xbox to develop a problem without warning it would be a good idea to learn how to fix all possible errors. Think about it, you could send it to a repair center to fix one problem, but what if it does not stop there? Are you prepared to pay more money for a different problem that could occur at any time? This is the reason why it makes a lot of sense to invest in an Xbox 360 repair guide; because it contains all possible solutions to all possible problems that the Xbox 360 may develop.

If you are having problems with your game system and need to find out how to fix the Xbox 360 open tray error; then just by finding this article you are already half way there. The reason that you get the open tray error comes down to the fact that your game disc is not being properly read by the optical laser, or is not being read at all by the laser. Now that we have narrowed the problem down a bit, the next step is to remove the Xbox case and expose the DVD drive.

Most Likely Causes Of The Open Tray Error:

Cause #1 – While you have removed the Xbox 360 cover and exposed the DVD drive carefully take a look at the laser module. If it appears to be dusty, then blow the dust away using a small fan. If you choose to use a can of pressurized air, make sure you do not have it on full blast, or you could damage something. You could also use a clean cloth to wipe the laser. But make sure you do not touch it with your bare hands.

Cause #2 – If the problem is not a dusty laser, then confirm that the laser module is at the correct starting position. By this i mean that you must make sure that it is in a position that is right under your game disc instead of it being in a position that is outside the disc area where there is no data to read. When you have read the guide on how to fix the Xbox 360 open tray error this will no longer be a problem for you.

Cause #3 – Another characteristic of the open tray error is that when you try to close the tray it spits it back out and gives you the error on your screen. Another possible cause is that the sensors at the back of the DVD drive could have overheated. Excess heat is bad for machines and it is the cause of a good number of malfunctions in many devices. In this case the tray might be getting ejected as a way to stop you from continuing to play while building up much more heat which could lead to more serious problems for your Xbox 360.

The Perfect Solution To The Open Tray Error

From my personal experience i believe that the most sure-fire way, and the most guaranteed method which gives you in-depth explanations on how to fix the Xbox 360 Open Tray Error is James Deans Xbox fix. Even though I found some other guides out there that made the same promise, I discovered that they did not in truth deliver on their promises. A lot of them did not give clear explanations and were not very easy to understand. Some just assumed that I knew what their technical speak meant, and did not go into much detail on some critical steps, so I got stuck and had to look for a better solution.